Electrostatic discharge can damage sensitive electronic components, interrupt production and contribute to costly product failures. In workplaces where electronic devices are manufactured, assembled, tested or stored, clearly identifying controlled areas is an important part of effective ESD management.

Heskins ESD Printed Floor Marking Tape provides a clear and durable way to mark ESD-protected areas, controlled workstations and restricted production zones. Its high-visibility printed design helps employees, contractors and visitors recognise where electrostatic discharge procedures must be followed.

Manufactured using the durable construction of Heskins PermaRoute, the tape combines high-definition printing, a protective surface laminate and a strong adhesive to create a professional industrial floor marking solution.

What Is ESD Printed Floor Marking Tape?

ESD Printed Floor Marking Tape is used to identify areas where electrostatic discharge controls are in place. It can be installed around workstations, assembly lines, testing areas, storage zones and entrances to ESD-protected areas.

Unlike standard single-colour floor tape, Heskins H6902 displays a clear printed warning directly on the floor. This makes the purpose of the marked area easier to understand and reinforces the procedures personnel must follow before entering.

The yellow, black and white design provides strong visual contrast, helping controlled areas stand out in busy industrial environments. The tape is supplied as standard in 50 mm x 30 m rolls, making it suitable for marking larger work zones and access points.

Why ESD Area Marking Is Important

Electrostatic discharge is the sudden transfer of electrical charge between two objects. Although a discharge may be too small for a person to notice, it can still damage sensitive components.

Facilities may use conductive flooring, grounding systems, ESD-safe clothing, wrist straps and specialist handling procedures to manage this risk. However, these controls depend on people understanding where they apply.

ESD floor marking tape helps to:

  • Identify the boundaries of an ESD-protected area
  • Reduce accidental entry into controlled zones
  • Reinforce employee training and workplace procedures
  • Support visual management and 5S systems
  • Direct visitors and contractors around sensitive areas
  • Reduce reliance on wall-mounted signs alone

Positioning the warning at floor level allows personnel to see the marking before entering the controlled area.

Key Features of Heskins ESD Printed Floor Marking Tape

Heskins H6902 is manufactured using the construction of PermaRoute, a durable printed floor marking material designed for industrial applications.

Printed and Laminated Surface

The ESD warning is printed beneath a protective surface laminate. This helps protect the design from direct contact, general wear and regular foot traffic.

Strong Adhesive

ESD Printed Floor Marking Tape features a strong adhesive designed to hold the marking securely in place when applied correctly to a clean, dry and suitable surface.

High-Visibility Design

The contrasting yellow, black and white appearance makes the printed warning easy to identify in factories, warehouses and technical environments.

Standard Roll Size

The tape is supplied as standard in 50 mm x 30 m rolls. Its total applied thickness is approximately 0.89 mm, with a tolerance of ±0.06 mm.

Where Can ESD Floor Marking Tape Be Used?

ESD Printed Floor Marking Tape is suitable for a range of controlled industrial and technical environments, including:

  • Electronics manufacturing facilities
  • Electrical component assembly areas
  • Semiconductor production environments
  • ESD-protected workstations
  • Testing and quality-control departments
  • Technical warehouses
  • Component storage areas
  • Laboratories
  • Clean manufacturing environments

The tape can be used to create a complete perimeter or installed at entrances and access points where additional procedures apply.

ESD Identification Tape Is Not Anti-Static

Heskins ESD Printed Floor Marking Tape is a visual identification product. The tape itself is not anti-static and does not dissipate electrical charge.

It should not replace conductive flooring, grounding equipment, ESD footwear, wrist straps, protective clothing or other electrostatic control systems. Instead, it identifies where those controls and procedures are required.

This distinction is important when specifying ESD floor marking tape for electronics, semiconductor and controlled manufacturing environments.

Supporting 5S and Visual Management

ESD floor marking tape can support 5S workplace organisation by helping employees understand where different processes take place and which rules apply within each area.

The tape can be used alongside other floor marking products to distinguish ESD-protected areas from pedestrian routes, equipment locations, storage zones and general production spaces.

A consistent floor marking system can make a facility easier to navigate while improving awareness of restricted or controlled areas.

Custom-Printed ESD Floor Marking Tape

Heskins can discuss custom printing options depending on the required design and order quantity.

Possible messages may include:

  • ESD PROTECTED AREA
  • ESD CONTROLLED ZONE
  • AUTHORISED PERSONNEL ONLY
  • ESD PPE REQUIRED
  • STATIC-SENSITIVE COMPONENTS
  • FOLLOW ESD PROCEDURES

Custom designs may also include directional arrows, department names, internal reference codes, access instructions or company branding.

How to Apply ESD Floor Marking Tape

For reliable adhesive performance, the floor should be clean, dry and free from dust, oil, grease and cleaning residue.

The recommended application temperature is 10°C or above. Apply firm and even pressure across the tape, paying particular attention to the edges.

For longer runs, plan the route before removing the release liner. This helps create a straight and consistent boundary.

Frequently Asked Questions

What size is the tape?

The standard product is supplied in rolls measuring 50 mm wide by 30 m long.

Can Heskins produce custom ESD floor tape?

Custom printing may be available depending on the design, dimensions and order quantity.

Where should ESD floor tape be installed?

It can be applied around protected areas, controlled workstations, access points and storage zones containing electrostatic-sensitive components.

Clearly Identify ESD-Protected Areas with Heskins

Heskins ESD Printed Floor Marking Tape provides a clear and professional way to identify controlled work areas. Its high-visibility design, protective laminate and strong adhesive make it suitable for industrial environments where clear visual communication is essential.

Although the tape does not provide anti-static protection itself, it supports wider ESD control programmes by identifying sensitive areas and reinforcing workplace procedures.

Contact Heskins to request a sample, discuss custom printing or find the most suitable ESD floor marking solution for your facility.