Glow in the Dark Hazard Anti Slip Tape - H3403D
Glow in the dark hazard anti slip tape is a simple variation of our glow in the dark anti slip tape. Printed chevrons on top gives extended purpose in allowing it to serve as a warning tape in any lighting condition also.
Afterglow performance is highly visible due to two levels of photoluminescent coating:
- The plastic liner is photoluminescent.
- The flexible resin that allows the grit to hold on to the liner is impregnated with photoluminescent, glow in the dark paste.
What differentiates glow in the dark hazards anti slip tapes purpose from plain is that the 45° chevrons applied to the surface creates a product which is visible day and night. During lights out, the chevrons do not glow providing high contrast between those and the glow in the dark anti slip tape to emphasise caution. Perfect for applying to walkways, stairs, fire exits and even around machinery that could be passed in low light.
Heskins photoluminescent products contain now radioactive materials, allowing their application in many environments.
Test on all materials are conducted using DIN, Pendulum and ASTM regulations. Test certificates and approvals can be obtained from us.
Glow in the dark hazard anti slip tape is available in roll or die-cut format. Conventional roll length is 18.3m but any roll length from 3m up to 100m being feasible, any roll width is possible. Die-cut custom pieces are possible in any size. For custom sizes and widths, minimum order quantities may be required.
To enquire further or place an order, contact the Heskins sales team by phone, Live Chat or the contact us form on the website.
Regulations and Certifications
Below is a table denoting what regulations glow in the dark Safety Grip meets and what certs, if any, are available.
|R118 (Burning behavior of materials used in the construction of commercial vehicles)||Download|