Slips, trips and falls remain one of the most common causes of workplace and public area accidents. Whether the risk is on stairs, ramps, walkways, entrances, platforms or production floors, improving traction underfoot is a simple but effective way to make environments safer. Heskins Standard Safety-Grip tape, also known as H3401, is a durable abrasive anti-slip tape designed to provide reliable grip in commercial, industrial and domestic settings.

As one of Heskins’ flagship products, Standard Safety-Grip tape has been trusted for many years as a practical solution for reducing slip risks. It is suitable for a wide range of general anti-slip applications, making it an ideal choice for businesses, facilities managers, contractors and homeowners looking for a dependable slip-resistant surface.

What Is Standard Safety-Grip Tape?

Standard Safety-Grip is an abrasive anti-slip tape manufactured with a 60 grit aluminium oxide surface. This creates a strong, textured finish that increases friction underfoot, helping to reduce the chance of slips in areas where smooth, worn or wet surfaces may become hazardous.

The product is self-adhesive, easy to cut and simple to apply, with no drying time required. This makes it a convenient alternative to painted anti-slip coatings, which often require preparation, drying and downtime. Once correctly applied to a clean, dry surface, Safety-Grip tape can provide immediate traction.

It is suitable for both internal and external use and is water resistant when applied to a suitable non-porous surface. This makes it a highly versatile non-slip tape for stairs, ramps, corridors, loading bays, warehouses, factories, public buildings and outdoor walkways.

Where Can Anti-Slip Tape Be Used?

Heskins Standard Safety-Grip tape can be used almost anywhere additional grip is needed. Common applications include stair edges, ramps, ladders, decking areas, entranceways, factory floors, warehouse walkways, platforms, vehicles, machinery access points and pedestrian routes.

In commercial and industrial environments, slip-resistant tape can help support workplace safety by clearly improving traction in high-risk zones. In public areas, it can help make steps and walkways safer for visitors, staff and customers. In domestic settings, it can be used on garden steps, garage floors, outdoor paths and other surfaces where extra grip is required.

Because Standard Safety-Grip is available in a wide choice of colours, it can also support visual safety marking. Black is commonly used for general applications, while yellow, hazard, red, white and other colour options can help highlight edges, changes in level or caution areas. This makes the product useful not only as anti-slip tape, but also as a visual safety aid.

Why Choose Heskins Standard Safety-Grip?

Heskins Standard Safety-Grip tape is designed for durability, grip and ease of use. Its 60 grit aluminium oxide surface provides a strong abrasive finish, while the adhesive backing allows the tape to be applied quickly to prepared surfaces. The tape can be cut to size, shaped for specific areas and applied with even pressure for a secure bond.

Another major advantage is the range of sizes available. Standard Safety-Grip can be produced in widths from 19mm up to 1168mm, with standard roll widths available for fast dispatch. This allows the same product to be used for narrow stair edges, wide walkways, floor coverage, custom shapes and larger safety marking projects.

The product also has a total applied thickness of 0.7mm, giving it a balance of durability and flexibility. This helps the tape perform well on flat surfaces and slightly contoured areas without adding unnecessary bulk.

Supporting Safer Workplaces and Public Areas

Using industrial anti-slip tape is a cost-effective way to improve safety without major structural changes. Many slip hazards are caused by smooth flooring, moisture, dust, worn surfaces or frequent foot traffic. Adding an abrasive safety tape provides an extra layer of grip exactly where it is needed.

For businesses, this can form part of a wider workplace safety strategy. Applying anti-slip stair tape, ramp tape and walkway tape helps identify and protect areas where people are more likely to lose footing. It is particularly useful in warehouses, manufacturing sites, schools, public buildings, transport areas and commercial premises where safety and efficiency are both important.

Custom Safety-Grip Options

Heskins also offers customisation options for Standard Safety-Grip tape. This can include custom colours, printed logos, warning text, arrows, directional markers or other visual indicators. Custom-printed anti-slip tape allows businesses to combine slip prevention with site-specific safety messaging, wayfinding or branding.

This is especially useful for facilities that want consistent safety communication across stairways, corridors, production areas and pedestrian routes.

A Practical Anti-Slip Solution from Heskins

Heskins Standard Safety-Grip tape is a reliable choice for anyone looking to improve grip, reduce slip risks and create safer surfaces. With its abrasive aluminium oxide finish, strong adhesive backing, water resistance and wide range of colours and sizes, it is suitable for many indoor and outdoor applications.

From anti-slip tape for stairs to heavy-duty walkway safety tape, H3401 Standard Safety-Grip provides a practical, effective and professional solution for everyday slip prevention.

For more information, samples or advice on the best anti-slip tape for your application, contact Heskins and speak to a member of the team.