Coarse Safety Grip Tape H3402
Coarse Safety-Grip has, like the name suggests, a coarser grit on its surface than that of standard.
The grit is still the same substance, aluminium oxide; but the difference is the grit granules are larger with deeper valleys and higher peaks. A deep anti slip coating helps to prevent clogging with dirt, dust, ice etc. A deeper grit provides great durability.
Coarse Safety-Grip is BS 7976:2 pendulum tested with results available on the tech specs tab.
Any width from 19mm up to 1168mm is possible. Widths of between 10mm and 18mm are available on special request. Sizes available off the shelf are 25mm, 50mm, 75mm, 100mm and 150mm in width, as well as full-width logs. All stock sizes have a length of 18.3m.
Due to the abrasive levels that coarse Safety-Grip possesses, it is more suitable for areas exposed to constant coverage of dirt or water. Industrial or construction sites do suffer from exposure to dirt, amongst other things. The deep recesses on the surface of coarse grip tape prevent it becoming clogged within reason, allowing it to provide adequate slip protection in demanding environments.
Custom Coarse Grip Tape
We can offer a host of custom anti slip solutions when it comes to H3402 coarse grip tape. Dependent on order quantity, Heskins produce coarse anti slip tape in any size, shape or colour (matching RAL and Pantone references).
If you are interested in H3402 coarse Safety-Grip tape, you can contact us by phone, Live Chat or the contact us form.
Coarse Safety Grip Tape is available in the following colours:
Light Reflectance Value
|Product Code||Colour||Av. LRV||Range|
Coefficient of Friction
|Dry Surface Test Result||Wet Surface Test Result|
|99 TRL||80 TRL|
Regulations and Certifications
Below is a table denoting what regulations coarse Safety Grip meets and what certs, if any, are available.
|R118 (Burning behaviour of materials used in the construction of commercial vehicles)||Download|